Hier nochmals die Nachricht die zum Absturz führte
New Found Provides Update on its QA/QC Program and Announces Collaboration with MSALABS to Utilize Chrysos PhotonAssay Methods for its Queensway Project
November 4, 2021
Vancouver, BC, November 4, 2021: New Found Gold Corp. (“New Found” or the “Company”) (TSXV: NFG, NYSE American: NFGC) is pleased to provide an update regarding its QA/QC Program at Queensway and to announce its plans to proceed with Chrysos whole-core PhotonAssayTM methods for the assaying of core samples from its 100%-owned Queensway Project (“Queensway”), located on the Trans-Canada Highway 15km west of Gander, Newfoundland.
As part of New Found’s ongoing technical and QA/QC work, independent consultants, RSC, recently submitted 30 half-core samples to Eastern Analytical (“EA”) for assay. The other half of these drill core intervals had previously been assayed by ALS Minerals (“ALS”) and incorporated into the Company’s reported drill results. A scatter plot comparing these results is provided below:
Figure 1. Scatter Plot, 30 Half-Core Verification Samples versus 30 Original Half-Core Samples, October 2021
Results from a set of 10 similar half-core verification samples were received and reviewed in May 2021. Differences observed in these assay results when compared to the original half-core samples were determined by New Found’s independent consultants to be not statistically significant.
The Company is now proceeding with a program to further assess the presence and source of the bias, and to implement steps based on its findings.
The bias observed in the 30 verification samples could be caused by one or a combination of the following: nugget-effect, sample selection bias and/or any part of the process of sample preparation or analytical methods used at the laboratories. The certified reference material (“CRM”) submitted as part of the Company’s internal QA/QC program did not identify a bias at either laboratory, however it should be noted that the CRM’s do not test the entire metallic screening process.
Two test programs have been designed by RSC with input from the Company to identify the potential sources of bias.
The first program will test whether there is a bias between the two labs and will involve submitting 167 half-core samples to ALS for crushing and splitting into two equal lots. The two splits are to undergo the standard metallic screening process at the two respective labs, EA, and ALS.
If a statistically significant bias is demonstrated in test program one, test program two will determine which laboratory produced the bias by collecting two sets of 60 half-core samples where one set was originally assayed at ALS and the other by EA and submitting these 120 half-core samples to a third “umpire” laboratory.
If testing program one does not indicate a bias between the labs, then the bias is likely to have been introduced during the sampling of the core in the core yard.
Both programs will run concurrently to limit further delays and the results are expected in approximately eight weeks’ time. The time line for completion of this work will depend on turnaround times at the assay labs, so there may be some variability in this time line. The Company and RSC are putting all their efforts into getting this program completed as soon as possible.
In the event that the test work determines that a bias was introduced in the sampling process, the remaining half-core samples still held by the Company will be sent for assay and a weighted average of the two half-core samples will then be used to determine an updated assay.
Recognizing the nuggety nature of gold mineralization at Queensway, for the last several months New Found has been considering implementing assaying of whole-core samples. This approach provides a larger sample for assay which reduces variability of assay results particularly helpful in nuggety gold systems such as at Queensway and removes the possibility of bias from the half-core sampling process. After consultation with RSC, the Company has decided to immediately move to whole-core assay as the primary method for future assaying of drill core intervals.
As part of the implementation of whole-core assaying, the Company is in advanced discussions with MSALABS to implement the state-of-the art Chrysos PhotonAssayTM method on whole-core samples from Queensway. This method is employed around the world by other companies on nuggety gold ores with excellent results.
The Company anticipates signing an agreement with MSALABS shortly for approximately 20,000 Chrysos PhotonAssayTM assays per month at a facility outside of Newfoundland and is advancing discussions towards installing a Chrysos PhotonAssayTM instrument in Gander. As part of this arrangement the Company would work with MSALABS to establish a sample preparation facility in Gander.
The benefits of utilizing the Chrysos PhotonAssayTM method on whole-core samples include:
The preservation of the entire whole-core sample in this non-destructive testing method leaving it available for additional assay and test work. The current fire assay technique followed by metallic screening for high-grade samples does not preserve residual material for further check assaying.
A much faster turnaround time for assay results, providing this critical operational information that drives optimization throughout the exploration and discovery value chain.
Significantly lower assay costs.
An environmentally friendly, chemical-free, more sustainable replacement for the traditional fire assay methods, significantly reducing CO2 emissions and hazardous waste.
Collin Kettell Executive Chairman of New Found stated: “Management and the Board of Directors are committed to working with RSC to complete a speedy and thorough test program to assess the presence and source of this bias, as well as determine and implement a resolution that will address this issue. Queensway is a nuggety gold system which comes with significant challenges that are widely recognized in the sampling and assaying processes. Moving to whole-core assaying will reduce the variability of assay results in this style of gold mineralization and will remove the possibility of bias from the half-core sampling process. As part of this transition, we are particularly excited to be advancing towards the use of the Chrysos PhotonAssayTM assay method. This technology allows the assay of an entire high-grade interval quickly and accurately and preserves the full sample for further verification assaying by conventional fire assay/metallic screening methods. The Chrysos PhotonAssayTM assay method is gaining wide acceptance and is being used by industry leaders such as Barrick. We are excited to be forming this partnership with MSALABS to proceed towards utilization of the Chrysos PhotonAssayTM method on our Queensway samples, and to work towards installation of a third party operated Chrysos PhotonAssayTM machine in Gander.”
Qualified Person
The technical content disclosed in this press release was reviewed and approved by Greg Matheson, P. Geo., Chief Operating Officer, and a Qualified Person as defined under National Instrument 43-101. Mr. Matheson consents to the publication of this news release dated November 4, 2021, by New Found. Mr. Matheson certifies that this news release fairly and accurately represents the information for which he is responsible.
About New Found Gold Corp.
New Found holds a 100% interest in the Queensway Project, located 15km west of Gander, Newfoundland, and just 18km from Gander International Airport. The project is intersected by the Trans-Canada Highway and has logging roads crosscutting the project, high voltage electric power lines running through the project area, and easy access to a highly skilled workforce. The Company is currently undertaking a 400,000m drill program at Queensway. The Company is well funded for this program with a current working capital balance of approximately $103 million, which is anticipated to increase to approximately $148 million on closing of the recently announced financing by Eric Sprott (note that this additional financing is subject to the satisfaction of customary closing conditions, including the approval of the TSX Venture Exchange (the “TSXV”) and approval by the shareholders of the Company if required by the TSXV).
Please see the Company’s website at www.newfoundgold.ca and the Company’s SEDAR profile at www.sedar.com.
Acknowledgements
New Found acknowledges the financial support of the Junior Exploration Assistance Program, Department of Natural Resources, Government of Newfoundland and Labrador.
Dazu die deutsche Googleübersetzung
Neu gefunden Bietet Update auf dem QA / QC-Programm und kündigt die Zusammenarbeit mit MSalabs an, um Chrysos-Photonassay-Methoden für sein Queensway-Projekt zu verwenden
4. November 2021
Vancouver, BC, 4. November, 2021: Neu gefunden Gold Corp. ("Neu gefunden" oder das "Unternehmen") (TSXV: NFG, NYSE American: NFGC) freut sich, ein Update in Bezug auf sein QA / QC-Programm in Queensway bereitzustellen Um seine Pläne bekannt zu geben, mit Chrysos Ganzkern-PhotoSassayTM-Methoden für das Testen von Kernproben aus seinem 100% -Ofen-Queensway-Projekt ("queensway") an der Trans-Canada-Highway 15 km westlich von Gander, Neufundland, gelegen.
Im Rahmen der laufenden technischen und qa / qc-Arbeiten von New Found, unabhängige Berater, RSC, eingereicht kürzlich 30 Halbkernproben für den östlichen Analytischen ("EA") für den Assay. Die andere Hälfte dieser Bohrkernintervalle wurde zuvor von ALS Minerals ("ALS") getestet und in die berichteten Bohrergebnisse des Unternehmens integriert. Ein Streuunterschied, das diese Ergebnisse vergleicht, ist unten angegeben:
Abbildung 1. Scatter-Plot, 30 Halbkern-Überprüfungsbeispiele versus 30 ursprüngliche Halbkernproben, Oktober 2021
Die Ergebnisse eines Satzes von 10 ähnlichen Halbkern-Verifizierungsmuster wurden im Mai 2021 empfangen und überprüft. In diesen Assay-Ergebnissen beobachteten Unterschiede wurden im Vergleich zu den ursprünglichen Halbkernproben von den unabhängigen Beratern von Neu gefunden, um nicht statistisch signifikant zu sein.
Das Unternehmen fährt nun mit einem Programm fort, um das Anwesenheit und die Quelle der Vorspannung weiter zu bewerten und die Schritte auf der Grundlage seiner Ergebnisse zu implementieren.
Die in den 30 Überprüfungsabtastungen beobachtete Vorspannung könnte durch eine oder eine Kombination der folgenden Folgendes verursacht werden: Nugget-Effekt, Probenauswahlvorspannung und / oder einem beliebigen Teil des Prozesses der Probenvorbereitung oder analytischen Methoden, die an den Laboratorien verwendet werden. Das als Teil des internen QA / QC-Programms des Unternehmens eingereichten zertifizierten Referenzmaterial ("CRM") identifizierte keine Vorspannung an einem Labor, es sei jedoch darauf hingewiesen, dass die CRMs nicht den gesamten metallischen Screening-Prozess testen.
Zwei Testprogramme wurden von RSC mit Input von der Firma entworfen, um die potenziellen Neigungsquellen zu ermitteln.
Das erste Programm wird testen, ob es eine Vorspannung zwischen den beiden Labors gibt, und beinhaltet, 167 Halbkernproben an Als ALS zum Zerkleinern und Spalten in zwei gleiche Lots einzugeben. Die beiden Splits sollen dem Standard-Metall-Screening-Prozess an den beiden jeweiligen Labors, EA und ALS unterzogen werden.
Wenn ein statistisch signifikanter Vorspannung im Testprogramm eingewiesen wird -Core-Proben zu einem dritten "Schiedsrichter" -Labor.
Wenn das Testprogramm eine Vorspannung zwischen den Labors nicht hinweist, wird die Vorspannung während der Probenahme des Kerns im Kernhof wahrscheinlich eingeführt worden.
Beide Programme laufen gleichzeitig, um weitere Verzögerungen zu begrenzen, und die Ergebnisse werden in etwa acht Wochen lang erwartet. Die Zeitlinie zum Abschluss dieser Arbeit hängt von der Turnaround-Zeiten in den Assay-Labors ab, sodass in dieser Zeit eine gewisse Variabilität erfolgt. Das Unternehmen und RSC setzen alle Bemühungen um, dieses Programm so schnell wie möglich abzuschließen.
Für den Fall, dass die Testarbeit bestimmt, dass in den Abtastprozess eine Vorspannung eingeführt wurde, werden die verbleibenden Halbkernproben, die von der Gesellschaft noch von der Gesellschaft gehalten wurden, für den Assay gesendet und ein gewichteter Durchschnitt der beiden Halbkernproben wird dann verwendet Bestimmen Sie einen aktualisierten Assay.
Erkennen der nuggety Natur der Goldmineralisierung an der Queensway in Queensway, für die letzten mehreren Monate, die neu gefunden wurden, erwägt die Umsetzung von Ganzkernproben. Dieser Ansatz bietet eine größere Probe für den Assay, wodurch die Variabilität der Assay-Ergebnisse senkt, die in Nuggety Gold-Systemen, beispielsweise bei Queensway, insbesondere hilfreich ist, und entfernt die Möglichkeit der Vorspannung aus dem Halbkernabtastprozess. Nach Absprache mit dem RSC hat das Unternehmen beschlossen, sofort als Primärmethode für die zukünftige Untersuchung von Bohrkernintervallen zum Ganzkern-Assay zu ziehen.
Im Rahmen der Umsetzung von Ganzkern-Assaying ist das Unternehmen in fortschrittlichen Diskussionen mit MSalabs, um die Methode von Chrysos PhotoStaytm-Methode auf der Muster von CHY-CORE von Queensway umzusetzen. Diese Methode ist auf der ganzen Welt von anderen Unternehmen auf nuggety Golderzerzungen mit hervorragenden Ergebnissen eingesetzt.
Das Unternehmen erwartet, dass sich das Unternehmen mit Msalabs mit Msalabs in Kürze für ungefähr 20.000 Chrysos-Photonassaytm-Assays pro Monat in einer Anlage außerhalb von Neufundland unterzeichnet und diskontiert Diskussionen zur Installation eines Chrysos-PhotoMassayTM-Instruments in Gander. Im Rahmen dieser Anordnung würde das Unternehmen mit MSalabs zusammenarbeiten, um eine Probenvorbereitungseinrichtung in Gander aufzubauen.
Die Vorteile der Verwendung der Chrysos-PhotonassAsTM-Methode auf Ganzkernproben umfassen:
Die konservati.
Her kommt der entscheidende Absatz meiner Meinung nach
Die Vorteile der Verwendung der Chrysos-PhotonassAsTM-Methode auf Ganzkernproben umfassen:
Die Erhaltung der gesamten Ganzkernprobe in dieser zerstörungsfreien Prüfmethode, die sie für zusätzlichen Assay- und Testarbeiten zur Verfügung verlässt. Die derzeitige Brandschutztechnik, gefolgt von einem metallischen Screening für hochwertige Proben, wird nicht das Restmaterial für weitere Prüfprüfung erhalten.
Eine viel schnellere Turnaround-Zeit für Assay-Ergebnisse, die diese kritischen Betriebsinformationen bereitstellt, die die Optimierung während der gesamten Erkundungs- und Entdeckungswertkette treibt.
Wesentlich geringere Testkosten.
Ein umweltfreundlicher, chemisch-freier, nachhaltigerer Ersatz für die traditionellen Brandschutzmethoden, die die CO2-Emissionen und den gefährlichen Abfall erheblich reduzieren.
Collin Kettell Executive Chairman von Neu gefunden: "Das Management und der Verwaltungsrat verpflichten sich, mit RSC zu arbeiten, um ein schnelles und gründliches Testprogramm abzuschließen, um das Vorhandensein und die Quelle dieser Vorspannung zu bewerten und eine Auflösung zu ermitteln und umzusetzen Ansprache dieses Problems. Queensway ist ein nuggety Gold-System, das mit erheblichen Herausforderungen ausgestattet ist, die in den Probenahme- und Assay-Prozessen weithin erfasst werden. Umzug auf Ganzkernuntersuchungen wird die Variabilität des Assays in diesem Stil der Goldmineralisierung verringert und die Möglichkeit der Vorspannung aus dem Halbkernabtastprozess entfernen. Im Rahmen dieses Übergangs sind wir besonders aufgeregt, auf die Verwendung der Chrysos-PhotonassAsTM-Assay-Methode vorzunehmen. Diese Technologie ermöglicht den Assay eines gesamten hochgradigen Intervalls schnell und genau und bewahrt die vollständige Probe für weitere Überprüfungsuntersuchungen durch herkömmliche Brandschutz-Assay / Metall-Screening-Methoden. Die Chrysos-PhotonassAsTM-Assay-Methode gewinnt eine große Akzeptanz und wird von Industrieführer wie Barrick genutzt. Wir freuen uns, diese Partnerschaft mit MSalabs zu bilden, um zur Nutzung der Chrysos PhotoNassaytm-Methode auf unseren Queensway-Samples in Richtung der Anlage in Richtung der Installation einer Drittanbieter-PRYSOS-Photonassaytm-Maschine in GANDER zu arbeiten. "
So jetzt will ich WIissen wo das Unternehmen was falsch gemacht hat und zeitgt mir bitte einen weiteren Explorer der gleichzeitig die Assasyproben an 2 verschiedene Labore sendet. Normalerweise hat ein Explorer ein Labor wo dieser alle Proben sendet. Wenn man dann mit diesem Labor nicht zufrieden ist dann wechsell man. Bestes Beispiel meine Northstar Gold die mit der Länge der Bearbeitung zurecht nicht zufrieden waren und die Proben in Zukunft an ein anderes Labor sendet. Berichtigt mich bitte wenn ich hier falsch liegen sollte. Kenne keine einzigen bisher der sowas macht.
Normalerwiese müsste man das Managment dafür loben das die sowas machen um die Qualität und id sicherheit zu erhöhen in dem man die Proben an 2 erschiedene Labore sendet um die Ergebnisse vergleichen zu können.
Jetzt haben die Labore untersucht und bei ein paar Proben ist eine Abweichung zu sehen. Objektiv geshen ist es hochptofessionell was die machen. DIe wollen jetzt WIssen warum das so ist und wol der Fehler liegt.
Dafür kann New Foundland nichts. DSes weiteren um in Zukunft sowas zu verhindern implementiert man ein neues Verfahren was besser sein soll als das alte und bihser ehehr nur von den großen Minen verwndet wird. Man will halt ide beste Technik dafür nutzen und dafür ist das neuste Verfahren dazu da. Das heißt die SIcherheit wird erhöht. DIe Zeikosten sind hier geringer undc das Verfahren ist insgesamt günstige und umweltschonender. Ich weiß nicht was daran jetzt schlecht sein soll.
Nach dem Motte was der Bauer nicht kennt wird auch nicht gegesssen.
Diese Tests und Vergleiche mit diesen besetimmten Proben brauchen halt auch Zeit und dieses Zeitfenster von ca. 2 Monaten wurd angegeben. Es bezieht sihc ja nur auf diese Proben und hat nichts mit den laufenden und zukünftigen Untersuchungen zu tun, da man ja auf dieses neu Verfahren umswitchen wird um den Prozess zu beschleunigen und zu verbessern.
Deswegen ist objektiv der Abverkauf und die Sippenhaft in New Foundland toal übertrieben und wird sich nächste Woche wieder umkehren. hier haben einige die Chance genutzt Angst zu streuen und billig unten die Aktien aufzukaufen. Mehr nicht. Alles natürlich nur meine Meinung.