Unique Fabricating, Inc. Reports Third Quarter 2018 Financial Results

Third Quarter Financial Summary

Total revenue for the quarter ended September 30, 2018 increased to $42.1 million, up 2.0%, or $0.9 million from $41.2 million during the same period last year. The increase was primarily driven by an increase in North American auto production of 4.2% quarter over quarter.

Gross profit for the quarter ended September 30, 2018 was $8.5 million, or 20.3% of total revenue, compared to $9.0 million, or 21.8% of total revenues, for the corresponding period last year. The decrease in gross profit was primarily related to short-term operational inefficiencies that arose when Unique shifted production from its Ft. Smith, Arkansas facility to other Company facilities, as well as from excessive labor turnover in some production facilities due to tight labor markets.

Restructuring expense for the quarter ended September 30, 2018 of $0.2 million was related to the previously announced manufacturing facility closure in Fort Smith, Arkansas and compares to $0 in the same period last year.

Net income for the quarter ended September 30, 2018 was $0.6 million, or $0.06 per basic and diluted share, compared to $0.7 million, or $0.07 per basic and diluted share, in the third quarter of 2017. The decrease in net income was primarily due to the gross profit decreases and the restructuring expenses described above, partially offset by higher sales.

Adjusted EBITDA for the quarter ended September 30, 2018 was $3.4 million compared to $3.7 million in the third quarter of 2017. The decrease is primarily a result of the lower margins as a percentage of sales described above, offset somewhat by higher sales. Please refer to the financial tables below for a reconciliation of GAAP to Non-GAAP results.

Adjusted diluted earnings per share for the quarter ended September 30, 2018 was $0.11 compared to $0.10 in the third quarter of 2017. Please refer to the financial tables below for a reconciliation of GAAP to Non-GAAP results.

Further non-cash purchase accounting impacts associated with the Company's acquisitions are detailed in the Purchase Accounting Impacts and Other Effects table below accompanying this release.

Year to Date Financial Summary

Total revenue for the first nine months of 2018 increased to $135.1 million, up 1.1%, or $1.5 million from $133.6 million during the same period last year. The increase was primarily driven by increased market penetration, partially offset by a decline in North American auto production of 0.4% year over year.

Gross profit for the first nine months of 2018 was $30.8 million, or 22.8% of total revenue, compared to $30.7 million, or 23.0% of total revenues, for the corresponding period last year. The decrease in gross profit as a percentage of sales was primarily related to the operational inefficiencies experienced during the third quarter.

Restructuring expense for the first nine months of 2018 of $1.2 million was related to previously announced manufacturing facility closures in Port Huron, Michigan and Fort Smith, Arkansas and compares to $0 in the same period last year.

Net income for first nine months of 2018 was $3.9 million, or $0.40 per basic and $0.39 per diluted share, respectively, compared to $4.4 million, or $0.45 per basic and diluted share, in the corresponding period last year. The decrease in net income was primarily due to the restructuring expenses and gross profit decreases described above, partially offset by the higher sales.

Adjusted EBITDA for the first nine months of 2018 was $13.9 million compared to $14.1 million in the same period last year. The decrease is primarily a result of the lower margins described above, partially offset by the higher sales so far this year. Please refer to the financial tables below for a reconciliation of GAAP to Non-GAAP results.

Adjusted diluted earnings per share for the first nine months of 2018 was $0.54 compared to $0.52 in the same period last year. Please refer to the financial tables below for a reconciliation of GAAP to Non-GAAP results.

Further non-cash purchase accounting impacts associated with the Company's acquisitions are detailed in the Purchase Accounting Impacts and Other Effects table below accompanying this release.

Balance Sheet Summary

As of September 30, 2018, the Company had approximately $1.0 million in cash and cash equivalents, as compared to December 31, 2017 when the Company had $1.4 million in cash and cash equivalents. Total debt outstanding as of September 30, 2018 was $55.8 million compared to $53.6 million as of December 31, 2017.

As of September 30, 2018, the Company had $4.6 million of available unused capacity, further subject to borrowing base restrictions and outstanding letters of credit, under its $32.5 million Revolving Line of Credit.

Amended and Restated Credit Agreement

On November 8, 2018, subsequent to the end of the third quarter, Unique Fabricating NA, Inc. and Unique-Intasco Canada, Inc. entered into an Amended and Restated Credit Agreement (the "Agreement"), which amended and restated its existing Credit Agreement. The Agreement increases the principal amount of two current US Term Loans to a combined total of $26.0 million by retiring a portion of the borrowings currently outstanding on the Revolving Line of Credit, while continuing to provide for borrowings of up to $30.0 million under the Revolving Line of Credit (subject to availability), as well as creating a new two year $5.0 million line of credit to fund capital expenditures. Furthermore, the Agreement extends the maturity dates of all borrowings from April 28, 2021 to November 7, 2023 and revises the amortization schedule of both the new US Term Loan and the current Canadian Term Loan.

2018 Outlook

For the full year 2018, Unique Fabricating is updating its outlook based on its results for the first nine months of the year and industry production forecasts of light vehicles manufactured for the year, based on independent industry research published in October, and the mix of production by light vehicle platform contained in such research.

The Company does not present a quantitative reconciliation of its forward-looking non-GAAP financial measures to the most directly comparable GAAP measures due to the inherent difficulty, without unreasonable efforts, in forecasting and quantifying with reasonable accuracy significant items required for this reconciliation.

Dividend

Unique's Board of Directors approved payment of a quarterly cash dividend of $0.15 per share on November 9, 2018. The dividend will be payable on December 7, 2018 to stockholders of record as of the close of business on November 30, 2018.

Quarterly Results Conference Call

Unique Fabricating will host a conference call and live webcast to discuss these results today at 9:00 a.m. Eastern Time. To access the call, please dial 1-877-705-6003 (toll-free) or 1-201-493-6725 and reference conference ID 13684545. The conference call will also be webcast live on the Investor Relations section of the company's website at http://uniquefab.investorroom.com.

Following the conclusion of the live call, a replay of the webcast will be available on the Investor Relations section of the Company's website for at least 90 days. A telephonic replay of the conference call will also be available from 12:00PM ET on November 9, 2018 until 11:59PM ET on November 16, 2018 by dialing 1-844-512-2921 (United States) or 1-412-317-6671 (international) and using the pin number 13684545.

About Unique Fabricating, Inc.

Unique Fabricating, Inc. (NYSE MKT: UFAB) engineers and manufactures components for customers in the automotive and industrial appliance markets.  The Company's solutions are comprised of multi-material foam, rubber, and plastic components and utilized in noise, vibration and harshness (NVH) management, acoustical management, water and air sealing, decorative and other functional applications. Unique leverages proprietary manufacturing processes, including die cutting, thermoforming, compression molding, fusion molding, and reaction injection molding to manufacture a wide range of products including air management products, heating ventilating and air conditioning (HVAC), seals, fender stuffers, air ducts, acoustical insulation, door water shields, gas tank pads, light gaskets, topper pads, mirror gaskets and glove box liners. The Company is headquartered in Auburn Hills, Michigan. For more information, visit http://www.uniquefab.com/.

About Non-GAAP Financial Measures

We present Adjusted EBITDA and Adjusted Diluted Earnings Per Share in this press release to provide a supplemental measure of our operating performance. We define Adjusted EBITDA as earnings before interest expense, income tax expense, depreciation and amortization expense, non-cash stock award, non-recurring integration expense, transaction fees related to our acquisitions, restructuring expenses, and one-time consulting and licensing ERP system implementation costs as we implement a new ERP system at all locations. We calculate Adjusted Diluted Earnings Per Share based upon earnings before non-cash stock awards, non-recurring expenses, transaction fees, and restructuring expenses, including the tax impact associated with these adjusting items. We believe that Adjusted EBITDA and Adjusted Diluted Earnings Per Share are useful performance measures used by us to facilitate a comparison of our operating performance and earnings on a consistent basis from period-to-period and to provide for a more complete understanding of factors and trends affecting our business than measures under generally accepted accounting principles in the United States of America (GAAP) can provide alone. Our board and management also use Adjusted EBITDA as one of the primary methods for planning and forecasting overall expected performance and for evaluating on a quarterly and annual basis actual results against such expectations, and as a performance evaluation metric in determining achievement of certain compensation programs and plans for Company management. In addition, the financial covenants in our senior secured credit facility are based on Adjusted EBITDA, as presented in this press release, subject to dollar limitations on certain adjustments and certain other addbacks permitted by our senior secured credit facility. These non-GAAP financial measures may have limitations as analytical tools, and these measures should not be considered in isolation as a substitute for analysis of Unique Fabricating's results as reported under GAAP.

Safe Harbor Statement

Except for the historical information contained herein, the matters discussed in this news release include forward-looking statements, as defined in the Private Securities Litigation Reform Act of 1995 that are subject to risks and uncertainties. Forward-looking statements relate to future events or to future financial performance and involve known and unknown risks, uncertainties, and other factors that may cause the Company's or the Company's industry's actual results, levels of activity, performance or achievements including statements relating to the Company's 2018 Outlook to be materially different from any future results, levels of activity, performance, or achievements expressed or implied by this press release.  Words such as "may," "will," "could," "would," "should," "anticipate," "predict," "potential," "continue," "expects," "intends," "plans," "projects," "believes," "estimates," "outlook," and similar expressions are used to identify these forward looking statements.  Such forward-looking statements include statements regarding, among other things, our expectations about revenue, Adjusted EBITDA, and adjusted diluted earnings per share.  All such forward-looking statements are based on management's present expectations and are subject to certain factors, risks and uncertainties that may cause actual results, outcome of events, timing and performance to differ materially from those expressed or implied by such statements.  These risks and uncertainties include, but are not limited to, those discussed in our Annual Report on Form 10-K for the year ended December 31, 2017 filed with the Securities and Exchange Commission and in particular the Section entitled "Risk Factors", as well as any updates to those risk factors filed from time to time in our periodic and current reports filed with the Securities and Exchange Commission.  All statements contained in this press release are made as of the date of this press release, and Unique Fabricating does not intend to update this information, unless required by law.  Reference to the Company's website above does not constitute incorporation of any of the information thereon into this press release.

Investor Contact:
Hayden IR
Brett Maas/Rob Fink
646-536-7331/646-415-8972
ufab@haydenir.com

UNIQUE FABRICATING, INC.
Consolidated Statements of Operations (Unaudited)
	Thirteen Weeks Ended September 30, 2018				Thirteen Weeks Ended October 1, 2017				Thirty-Nine Weeks Ended September 30, 2018				Thirty-Nine Weeks Ended October 1, 2017
Net sales	$	42,051,968			$	41,231,366			$	135,098,491			$	133,606,501
Cost of sales	33,528,457				32,256,440				104,305,811				102,858,323
Gross profit	8,523,511				8,974,926				30,792,680				30,748,178
Selling, general, and administrative expenses	7,226,204				7,268,812				22,571,692				22,455,833
Restructuring expenses	175,526				—				1,155,910				—
Operating income	1,121,781				1,706,114				7,065,078				8,292,345
Non-operating (expense) income
Other (expense) income, net	21,166				39,673 Werbung Mehr Nachrichten zur Unique Fabricating Aktie kostenlos abonnieren E-Mail-Adresse Bitte überprüfe deine die E-Mail-Adresse. Benachrichtigungen von ARIVA.DE (Mit der Bestellung akzeptierst du die Datenschutzhinweise) -1 Vielen Dank, dass du dich für unseren Newsletter angemeldet hast. Du erhältst in Kürze eine E-Mail mit einem Aktivierungslink. Hinweis: ARIVA.DE veröffentlicht in dieser Rubrik Analysen, Kolumnen und Nachrichten aus verschiedenen Quellen. Die ARIVA.DE AG ist nicht verantwortlich für Inhalte, die erkennbar von Dritten in den „News“-Bereich dieser Webseite eingestellt worden sind, und macht sich diese nicht zu Eigen. Diese Inhalte sind insbesondere durch eine entsprechende „von“-Kennzeichnung unterhalb der Artikelüberschrift und/oder durch den Link „Um den vollständigen Artikel zu lesen, klicken Sie bitte hier.“ erkennbar; verantwortlich für diese Inhalte ist allein der genannte Dritte. Andere Nutzer interessierten sich auch für folgende News 21.05.24 - PR Newswire Weiss Korea Opportunity Fund - Amendment: Dividend announcement 21.05.24 - PR Newswire Augmentum Fintech Plc - Irrevocable Share Repurchase Programme Die Wachstumsgeschichte    Analysten sehen kurzfristige +37 %-Chance bei diesem europäischen Marktführer weiterlesen» Anzeige wo-site-teaser-box-17020_site-teaser-box_2024-05-21_07%253A00%253A00_2024-05-22_09%253A00%253A59